Flare Stacks

The UF10 range of flares offer the customer a fully compliant solution to flaring of its Gas. These units have proven technology that meets the Environment Agency’s requirements in terms of emissions and are designed and procured to fully meet all requirements in terms of ATEX and DSEAR certification. The UF10 range comes in various standard ranges in terms of flow rate and starts at 10 Nm3hr through to 10,000 Nm3hr. Available for both short and long term hire and purchase.

The UFU10 range of flares and gas utilisation equipment are generally tailored to suit the customer’s application and specific requirements and offer seamless control of the gas between its utilisation application and the flare stack. These units come in various sizes from 10 Nm3hr through to over 10,000 Nm3hr if required.

The UF10 Lean gas range of flares are specifically designed for the closed and declining in gas landfill sites. Uniflare’s unique burner design has 100% proven track record with emissions standards set out by the Environment Agency and their guidance on flaring LFGTN-05 these units offer a cost effective solution to controlling the landfill gas once at lower calorific values past site closure. We supply these units in a number of flow rate sizes and to different design such as containerised and skid mounted and as it does not rely on a contact supplementary fuel offer. Also a low OPEX solution for handling the landfill sites declining gas both safely and compliantly. Uniflare have designed and manufactured many of these units and have them installed and operational across the globe.

This range of equipment offers the customers either a long or short term solution to dealing with their waste gas. The UFO Range are all skid mounted for easy and rapid installation and can be easily moved around site for flaring surplus gas and carrying out pumping trials. They come in various sizes in terms of flow and range from 1 Nm3hr to 10,000 Nm3hr and are available for both long and short term hire and purchase.

The UFO-ENV range of flares are predominantly used on AD Plants and Waste Water Treatment Plants as emergency flares where the criteria for the flare is that it needs an invisible flame but does not need to meet emissions standards due to the hours of operation it would ever perform. Again Uniflare designs and manufactures these to our customers specification and using its unique combustion technology provides a system that is reliable and if fully compliant with ATEX, DSEAR and all other relevant directives.

The UFGTP range of systems are a Turnkey solution offered by Uniflare to the gas handling and process.  This includes all the equipment and pipework required to connect from an AD Plant or Wastewater Treatment Plant digester outlet through to the CHP/Boiler/Gas Upgrader/Flare Stack inlet and also includes all the equipment required to both process and handle the gas, but also deliver it to its end source at the inlet conditions it requires. All the equipment is fully designed and manufactured in house and we ensure the system will be delivered to site both to the highest quality but also a system that is fully integrated and matched.

The UF10- VAB range of flares are specifically designed and used in conjunction with Parker SRS Siloxane removal plant. The unit is used to safely combust the re generation air from the Siloxane Plant and using the Uniflare Group combustion technology provides a system that uses a small amount of the gas to compliantly combust the vent air and meets emission standards.